BackHomeProductsSolenoid & Lock

Model No.: JY38-4052JY38-4052 Electric lock with micro switch small solenoid lock

Ready to Ship
In Stock Fast Dispatch

JINGYUAN Electronic lock Solenoid 12V -24V Mini Electromagnetic Lock Cabinet Locker

  • 1-49 Pieces
  • 50-99 Pieces
  • >=100 Pieces

Final price to be confirmed according to custom configuration and shipping costs

We have different small size of solenoid lock with different housing such as plastic, silver stainless steel. Touch us for fast quotes and catalog,  we will following your order seriously.  

  • Voltage & Current : DC12V 2A; Action Type: Push Pull
  • Package Content : 1 x Electromagnet Solenoid Lock
  • Easy to Install - It's with simple structure,and it can save the energy and the time during the installation for you.
  • Self Elastic Design - Elasticity adjustable, suitable for weight 0.5~2kg door
  • Security- Latch hook can bear 150kg traction, won't obvious permanent deform permanently, shockproof, anti prying


1.Three surface treatments: copper plating, nickel plating, galvanizing or electrophoresis black.

2.We have two switch gor your refer.

One :omron micro-detection switch from Japan, 500,000 working life.
Two : Domestic miniature detection switch from China,200,000 working life.

3.Mechanical emergency lever for manual unlocking in the event of a power failure.
   Support for custom wires and connectors.

4.Widely used for locking electronic lockers, smart express cabinet, vending machines, electronic newspaper boxes and etc.

   Having been through electrophoresis, the lock is steady, reliable and strictly functional.

5.In the super-thin design, the lock will save much more room for the products in the case while saving raw materials.


1. Size: 73*58*13mm can be customized small size.
2. Working method: independent function (lock when power off,unlock immediately when power on).
4. Mechanical lifespan: over 500,000 times.
5. Electromagnet lifespan: over 1,000,000 times under rating conditions.
6. Unlock test: Build-in test.
7. Can be used for self bounced off (customizable).
8. Material: SPCC cold rolled sheet
9. Surface :Electroplating paint (Neutral smoke experiment time: over 48 hours)
10. Security: The hook can withstand 150kg of tension without obvious permanent deformation, 
with shockproof and anti-pry function.
11. Environment temperature: can working in range over 60 degrees to 10 degrees below zero.
12. Installation: Reserved mechanical emergency unlock position,Easy install.

13. Electromagnetic lock commodity code: 8301400000

Model JY38-4052
Rated Voltage DC12V or DC24V 
Resistance 9 Ω ± 10% @20°C
Currency 1.333A
Power 16W
Dielectric Withstand 600VAC/1Sec
Insulation Resistance 500VDC/100M Ω
Energize Rate 15% (conduction time: 8s Max)
Insulation Grade Class B(130°C)
Attractive Force

Stroke: 5mm

Packing&Shiping of electric solenoid lock:

Unit size : 73 * 58* 13 mm 
Packing case :100 pcs 
Carton Size: 330*360*130mm  Carton weight : 0.8kg



Working mode:

Manual closing lock, power instant trigger lock mode.Normal closed status do not power consumption.
It is steady, durable and energy-saving and had a long lifespan.
In the anti-theft and shockproof design, the lock is better than other kinds of locks.
Emergency unlock: lock body above the tail with an emergency unlock operation mechanism.
Versatility: The lock regardless of left and right, whether left or right door open are applicable.

Emergency unlock: lock body above the tail with an emergency unlock operation mechanism.
The lock with a peephole, you can easily adjust the closing state of the monitoring switch off the time point.

Note of electric solenoid lock:
1. Before the installation of power (less than 0.8S time) to detect the operation of electronic control lock is flexible, check the door to monitor the switch status is normal, confirm the working status are normal and then the actual installation
2. In the repeated continuous power test, the power rate must follow the 5% limit, otherwise it will burn the coil, such as instantaneous power 0.8S, every 16S can only power once.
3. In the smart control lock tail leads to two two-core connector: connect the red and black two-wire connector for the electromagnet power supply terminal; connect the white and blue two-wire connector for the closed monitoring terminal, two connectors Are both positive and negative.


Application of electric solenoid lock:

Armadietto.jpg   DHL locker.png  

small solenoid lock
Many solenoids are not, and have a rating for 'continuous operation' This mechanism is 'fail secure' that means its locked when no voltage is applied. if you want something that remains unlocked most of the time, get a lock that is fail-safe, and leave the voltage off.
Granted I have not had this unit installed for weeks or even months, but I fired it a couple dozen times - It worked fine. ( and did not overheat)
But I only had voltage applied for 3 seconds at a time. ( but that's how this lock should be run ) I'm happy with it.
Also worth noting the design of the lock has some other parts in the 'latch' the load is not in direct contact with the solenoid shaft ( that's GOOD) and there is a spring that is compressed against the latch. The latch is actually pushed away from the body when the solenoid fires. If whatever your opening is light enough, it should 'pop open' slightly when the solenoid fires. The way the solenoid is designed, this should operate ok even if there is load on the latch , and if you needed to manually release the latch, you can do this by depressing the solenoid manually ( but only if you had physical access to that part of the lock) 

Small solenoid lock denotes a latch for electrical locking and unlocking. It is available in unlocking in the power-on mode type, and locking and keeping in the power-on mode type, which can be used selectively for situations. The power-on unlocking type enables unlocking only while the solenoid is powered on. A door with this type is locked and not opened in case of power failure or wire disconnection, ensuring excellent safety. This type is used mainly for places requiring crime prevention. The power-on locking type can lock a door while the solenoid is powered on. If the power is disconnected, the door is unlocked. This type unlocks the door in case of wire disconnection due to a fire or accident, and it is used for emergency exits through which fire-fighting activity or evacuation should preferentially be made rather than safety for crime prevention. The keeping type performs two operations, locking and unlocking by applying a positive or negative pulse voltage to the solenoid, and keeps the no-power state in each position. This type features energy saving because it is unnecessary to always power the solenoid on. For the continuous rating and the intermittent rating, the continuous rating is designed to be able to feed a rated voltage power continuously for hours without exceeding a specified temperature rise limit, and the intermittent rating is designed to be able to feed a specified voltage  only for a specified time duration without exceeding a specified temperature rise limit.

  • Name:
  • E-Mail: *
  • Model No.: *
  • Address: *
  • Message: *